The ATON HDR44 HD Video Router allows you to share four High Definition* video sources from the family or theater room with four other areas throughout the house. Extend the HD and 5.1 Surround Sound** experience to rooms such as the master bedroom, den or even the kid's play room, without needing to purchase multiple video sources for every room in the house.
Retail Price:
$1,299.00
AtonHDR44KT
4 Room HD Video and Digital Audio Matrix Installation Kit
Kit includes:
(1) HDR44 Router
(4) R44WP Wallplates
(4) AIR1b Rcvrs
(4) AIE1 IR Emitters
(1) R44IRM Slimline IR Remote
Receives all video and audio from the HDR44 via 2 Cat5 wires, then outputs HD video and analog audio to the zone TV display and digital audio to an in-room A/V receiver
Split your video and audio signals from multiple sources to multiple destinations!
Features
Broadcasts the audio and video outputs from up to two computers to up to two monitors
Any one of the inputs can be broadcast to any or all of the outputs. Simultaneously display an image from one source to one of the monitors and an image from the second source to the second monitor.
Built-in video signal enhancement allows monitors to be placed up to 164 feet away
Use the 3.5mm audio outputs to drive either speakers or earphones
PC selection via push buttons or IR remote control
Supports video resolutions up to 2048x1536
Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multisync monitors
Maximum bandwidth of 450MHz
Audio output: 0.5V~1.0V9
Input connectors: (2) HD15 Female and (2) 3.5mm stereo jacks
Output connectors: (2) HD15 Female and (2) 3.5mm stereo audio jacks
Component Video with stereo/TOSlink: Adds 6 inputs and 2 outputs to your TV or Home Theater
Features:
Rack Mount Ears and Hardware Included
Component Video Inputs: 6 (5 Rear, 1 Front)
Component Video Outputs: 2 (Rear)
Audio Inputs: L/R Analog Audio (5 Rear, 1 Front via 3.5mm jack), TOSlink Optical Digital Audio (5 Rear, 1 Front)
Audio Outputs: L/R Analog Audio and TOSlink Optical Digital Audio (2 Rear)
Compatible with all interlaced or progressive scan analog component video signals
3 Input/ 5 Output component video, stereo and TOSLINK audio, plus RS-232 control
Features:
Component Video Inputs: 3 (2 Rear, 1 Front)
Component Video Outputs: 5 (Rear)
Audio Inputs: L/R Analog Audio (2 Rear, 1 Front via 3.5mm jack), TOSLINK Optical Digital Audio(2 Rear, 1 Front)
Audio Outputs: L/R Analog Audio and TOSLINK Optical Digital Audio (5 Rear)
Compatible with all interlaced or progressive scan analog component video signals
Route any 4 Component AV Sources to any 4 Displays -- with S/PDIF support.
The Gefen 4x4 Component w/Audio Matrix offers unprecedented flexibility and convenience by routing high definition video and analog/digital audio from any of four sources to any of 4 local displays and audio reproduction equipment.
Full High-Resolution HDTV signals are supported up to a resolution of 1080p. The Gefen 4x4 Component w/Audio Matrix works with any Component Video source including DVD players, cable boxes, and satellite set-top boxes that connect to a Component display. Every source is accessible at all times by any display by selecting it with the IR remote.
The Gefen 4x4 Component/Audio CAT5 Matrix offers unprecedented flexibility and convenience by routing high definition video and analog/digital audio from any of four Component video sources to any of 4 remote displays over standard CAT5 cabling.
The rack-mountable 8x4 Matrix for HDMI sends high definition video and multichannel digital audio from any of 8 HDMI sources to any 4 Displays. The HDMI inputs consist of 4 High Definition video switches that can each accept 2 video sources. This input scheme allows up to 8 sources to be available while viewing any 4 on the output displays concurrently.
The 8x8 Matrix for HDMI provides a simple, reliable and highly effective method of connecting any 8 HD displays to any 8 HDMI sources. Switching of HDMI sources is done using the included IR remote control or the built-in RS-232 serial communications port via computer or a control automation device such as Crestron.
The 4x4 Matrix for HDMI 1.3 routes high definition at resolutions up to 1080p with multichannel digital audio from any four HDMI sources to any four displays. The 4x4 Matrix eliminates the need to disconnect and reconnect HDMI sources. It works with any HDMI source that connects to an HDMI display, supporting advanced digital audio formats such as Dolby TrueHD and DTS HD Master Audio. Each source is accessible at all times by any display by selecting it with an IR remote, or using the RS232 port to switch the unit.
The Gefen 4x4 VGA Matrix offers flexibility and convenience by routing high-quality VGA and analog audio from any of four VGA/audio sources to any of 4 VGA displays and audio devices.
ISYNC HD is a full featured digital video processor and switcher, that is flexible and easy to use.
Digital Video Processor & Switcher, flexible and varied digital and analog video input formats and connectors, including HDMI with HDCP, Component Video (YPbPr), Composite and S-Video Pass-through, or sizes most popular video sources to precisely match the native resolution of your display, The ideal substitute for a Media Box, allowing you to connect all sources to your Plasma display with one cable for the highest quality
Retail Price:
$1,500.00
LKGLKV342
2x2 4x2 HDMI 1.3 Matrix
4X2 HDMI Matrix Swtich LKV342 Distributes any one of 4 sources to either of 2 displays or to both 2 displays simultaneously;
-Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p;
-Switch easily between multiple HDMI sources via remote control or via buttons on the unit;
-4X2 HDMI Matrix Swtich LKV342 is with inner IR receiver to enlarge IR remote control signal;
-HDMI 1.3 V and compliant with HDCP;
-Power: 5wtts (Max);
-Power Supply: DC 5V
LKGLKV344
2x2 4x4 HDMI 1.3 Matrix
.
-It is real HDMI 1.3 version and HDCP compliant;
-Support full HDMI resolutions 1080p, 1080i, 720p, 720i and standard video format;
-Multiple Switching modes: IR remote control, operate manually or operate via RS232 port;
-With IR extender: enlarge remote control signal;
-Rack-mountable: with mounting kit and screws;
-Input video signal: 0.5-1.0 volts p-p;
-Input DDC signal: 5 volts p-p (TTL);
-Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio;
-HDMI video color format: deep color;
-Maximum transmission distance: 10 meters by 28AWG cable; 15 meters by 26AWG cable(for further distance, HDMI extender is optional);
-Power consumption: MAX. 36W;
-Power supply: 12V DC, 3A
4x4 component video switching with up-comversion for S-video and composite on sources 1 and 4.
Includes:
(1) 4x4matrix (VM1)
(1) power supply (A-PS)
(4) video receivers (VMR1)
8x8 component video switchimg with up-conversion for S-video and composite on sources 1 and 4 .
Includes:
(1) 8x8 matrix (VM1)
(1) power supply (A-PS)
(8) video receivers (VMR1)
8x8 component video switching with up-comversion for S-video and composite on sources 1,4,5 and 8.
Includes:
(1) 8x8 matrix (VM1)
(1) power supply (A-PS)
(8) video receivers (VMR1)
